Cleaning

Kadant’s stock cleaning systems provide high efficiency removal of contaminants in pulp slurries. Cleaning involves converting pressure into high velocity using specially-designed cyclonic separators. The stock is introduced to the cone tangentially and forced to rotate at high speed resulting in high centrifugal forces that separate the fiber from contaminants based on density and shape differences.

Liquid Cyclone™ Cleaner

Liquid Cyclone™ Cleaner

A free vortex separator designed for efficient removal of contaminants from all types of applications including OCC coarse screen, refiner, and deflaking protection in a broke system. Available in a wide range of sizes and configurations with a low maintenance, non-plugging design for continuous or intermittent operation.

XCEL™ NT Forward Cleaner

XCEL™ NT Forward Cleaner

This high consistency, forward cleaner system is built to exceed current industry baselines for performance and capacity. The XCEL NT is a highly optimized, modular solution to tough heavy contaminants such as grit, metal, and sand. It offers substantial power savings and efficient cost-saving use of valuable dilution water.

XX-Clone™ Through-Flow Cleaner

XX-Clone™ Through-Flow Cleaner

Designed for optimum efficiency under very low consistency conditions, the XX-Clone through-flow cleaner removes wax, Styrofoam®, hot melt adhesives, and other material with a specific gravity less than water.  The cleaner employs centrifugal force to concentrate light contaminants at the air core so they can be efficiently separated from the good pulp slurry.

Xtreme™ Cleaner

Xtreme™ Cleaner

The XTREME cleaner uses the latest reverse cleaning technology to remove lightweight debris from all types of pulp and paper stock.  It delivers extremely high cleanliness standards for the removal of wax, Styrofoam®, hot melt glues, latex, grease, and other low-density materials.

XCEL™ 150 Cleaner

XCEL™ 150 Cleaner

The XCEL 150 is a high-efficiency sand and grit removal system setup in custom banks to optimize fine cleaning. Centrifugal force causes water and heavy debris such as grit, glass, sand, pins, staples, gravel, dirt, metal, abrasives, and other small heavy objects to move to the outer wall and spiral to the bottom of the unit for removal. 

X-Clone™ Cleaner

X-Clone™ Cleaner

The X-Clone cleaner utilizes the through flow principle to remove typical low specific gravity contaminants such as waxes, polystyrene foam, polyethylene, hot melt adhesives, and other light, floatable material from a variety of furnishes.

Radiclone™ Hydrocycloning Systems

Radiclone™ Hydrocycloning Systems

With a unique canister design to minimize cost and floor space, Radiclone systems are perfect for applications with a high demand for pulp and paper cleanliness. The low operating and maintenance costs, in conjunction with the high-performance cleaning capability, offer efficient fiber processing with plenty of specially designed options. The Radiclone AM80 provides high-efficiency removal of heavy-weight contaminants and fractionation. The Radiclone BM80 provides high‐efficiency removal of lightweight contaminants and thickening.

Periclone™ Hydrocycloning Systems

Periclone™ Hydrocycloning Systems

Periclone hydrocycloning bank systems operate in a wide consistency range and are used for a variety of cleaning purposes, such as paper machine approach flow systems, and chemical pulp systems. These systems are designed to achieve excellent cleaning performance with efficient removal of heavy‐weight contaminants. Optimised design combined with operational reliability result in lower operating costs and minimised energy consumption.

HDC™ High Density Cyclone

HDC™ High Density Cyclone

The High Density Cyclone is used for separation of abrasive, heavy-weight impurities such as sand, glass, and metal. Intermittent reject discharge minimizes fiber losses. It can be installed as a complement to other pulp cleaning or screening equipment and/or to protect other rotating equipment. A typical application is in the tail-end of a fine screening system, where hard particles need to be removed efficiently in order to minimize wear on screen baskets and rotors. In an approach flow system, it can be installed as the last stage of a cleaning installation


 

 
 
PRC™ Protection Cyclone

PRC™ Protection Cyclone

The PRC is used for separation of heavy-weight and highly abrasive coarse material. Intermittent reject discharge minimizes fiber losses. It can be installed as a complement to other pulp cleaning or screening equipment and/or to protect other rotating equipment. A typical application is in a virgin fiber line or in a bale pulping line, where coarse material needs to be removed efficiently in order to protect downstream equipment.

CLP HydroCyclones

CLP HydroCyclones

CLP hydrocyclones and hydrocyclone parts are designed to replace Cleanpac® brand hydrocyclones. The CLP series features the same operating parameters as the OEM hydrocyclones and can easily be installed in the same bank or canister. Multiple sizes and a variety of quality replacement wear parts are available. Cleanpac® is a registered trademark of GL&V Management Hungary Kft. Kadant Inc. and its subsidiaries are not affiliated with or sponsored by GL&V.

 
STR Valve

STR Valve

The STR valve is a severe-duty stainless steel knife gate valve for use with our Liquid Cyclone Cleaner and in other high and medium density cleaning and detrashing systems such as our Hydraflow. Its rugged construction makes quick work of high concentration contaminants such as glass, sand, staples, nuts, bolts, and other hard debris.

 
STR Reject Chamber

STR Reject Chamber

The STR reject chamber is a durable cast iron unit that handily contains heavy debris and controls the trouble it can cause. Created specifically for use with our robust STR valves (shown together here as used with our Liquid Cyclone™ cleaners), these durable reject chambers are feature-built for optimized performance, maximized flow, and reduced maintenance.

media

Solutions support

Our technical service and support teams are ready. We provide guidance in the planning, design, engineering, installation, start-up, and ongoing support of your systems.
Kadant
© Kadant Inc.

News  |  Privacy  |  Terms